If the LED on your D-Link wireless range extender is blinking red instead of green, then you are in trouble. But, worry not because we can help you get rid of this issue. Follow the troubleshooting hacks mentioned in this post and learn how to stop the LED on your WiFi device from blinking red.
Resolved: D-Link Extender Red Light Issue
- Reboot Your D-Link Extender
Start troubleshooting the D-Link extender red light issue by rebooting your D-Link wireless range extender. Not sure about how to do that? Follow the instructions mentioned below and learn how to go about the rebooting process:
- Power off your D-Link range extender and unplug it from the wall socket.
- Wait for a couple of seconds.
- Thereafter, plug your extender back into its wall socket and turn it on.
Once you are done rebooting your D-Link wireless range extender, check whether the red light issue persists. If it does, continue reading this post.
Note: If you also want to reboot your dlinkrouter, the same steps will apply.
- Verify the Ethernet Connection
One of the many reasons why you are struggling with the D-Link extender red light issue is because of an unstable Ethernet connection. An unstable Ethernet connection can occur if the Ethernet cable connecting your extender and router is worn out or damaged.
To troubleshoot the issue, it is recommended that you replace your Ethernet cable with a new one. Or, consider connecting your devices wirelessly.
- Bring Your Devices Closer
Apart from ensuring a secure connection between your D-Link wireless range extender and home router, you also need to make sure that the distance between your devices is not too much. Otherwise, the communication between them won’t happen nicely.
Therefore, if you have placed your extender far from the router, unplug it from the wall outlet it is currently plugged into and plug it into the one located near your home router.
- Avoid Signal Interference
Make sure that your D-Link wireless range extender, as well as your home router, is placed away from the following devices, appliances, and surfaces:
- Cordless phones
- Washing machines
- Baby monitors
- Bluetooth speakers
- Mirrors
- Fish tanks
- Treadmills
- Televisions
- Refrigerators
- Microwave ovens
- Corners
- Concrete walls
- Aluminium studs
Also, place your devices away from utensils containing a large amount of water.
- Update the Firmware
Another thing that you can do to get rid of the D-Link extender red light issue is to update the firmware of your wireless device.
Follow the instructions mentioned below and learn how to update the firmware of your D-Link wireless range extender:
- Switch to your computer.
- Launch an internet browser.
- In the address bar of the internet browser, type http //dlinkap.local.
- Press the Enter key.
- You will get welcomed by the official login page of your D-Link extender.
- Input the default extender admin password and username.
- Click the Log In button.
- Once you are on the web-based setup page, head over to the Settings menu.
- Select Maintenance > Firmware Update.
In some time, the firmware of your D-Link wireless range extender will get update to the latest version.
- Perform Factory Default Reset
Are you still struggling with the D-Link extender red light issue? Well, in that case, consider performing factory default reset.
Follow the instructions mentioned below and learn how to reset your device:
- Find the Reset button located on your extender.
- Take an oil pin and carefully press the Reset button using.
- Wait for a few seconds.
Now, access the D-Link extender login page and set up your device from scratch.
Need Help?
In case you are still going bonkers because of the D-Link extender red light issue, do drop a plea of help in the comment section. Surely, some of your fellow readers will be able to assist you.