An Elaborate Guide to Solve Not Working Issue

Apart from the several benefits that you get after performing the Netgear extender setup, you have the advantage of tweaking its settings. Changing the settings of your range extender requires you to gain access to or mywifiext.local page, depending on the device that you are using. But, what is that? Did you try to make your way to the mywifiext page but ended up getting an error message? Was that message somewhat similar to not working? Yes? Well then, you are in trouble.

But, relax because your days of worrying are over. By the time, the last hack has been read by you, the not working issue would have said goodbye to you. Thus, read on.

[Solved] Not Working Issue

  1. Update the Internet Browser

Using an outdated internet browser is known to cause a number of technical issues. There is a very high possibility that you are facing the not working issue because of this factor. Therefore, what you need to do is quite simple, i.e. update your browser.

Worry not. Updating your internet browser is not difficult. You simply have to access the Settings menu, access the Update Browser option, and click on it. Wait for some time. As soon as you have updated your browser, try to access the page.

By any chance, if you are still stuck with the not working issue, then you should not waste even a second more to follow the next hack.

  1. Avoid Typing Mistakes

Another common reason behind the not working issue is that you have committed typing errors while using the default web address.

Therefore, it is recommended that the next time you try to access, make sure that there are zero typing mistakes. Remember one thing very clearly, one wrong character is enough to redirect to a website that you would rather not visit.

Are you still a victim of the refused to connect issue? Is that a yes that we see? Well then, it looks like this issue has pushed into a pit much deeper than we thought. But, fret not. This article still has a couple more hacks to help you out.

  1. Check the Internet Connection

The speed of your internet browser depends on how well your networking devices are connected. If the connection between your extender and router is hanging loose, then your internet connection is weak. So, consider tightening the connection between your devices.

For that, you need to make sure that the cable connected to the ports of your devices is free of damages.

  1. Pull the Networking Devices Closer

The distance between your Netgear extender and the router also plays a major role when it comes to your device receiving a fast internet connection.

In other words, if the distance between your devices is too much, your internet will drop. In case the distance is too less, then the signals emitted from the devices will clash. Thus, you should ensure that your devices are kept at a safe distance, neither too close nor far. Trust us, this one hack will also prevent you from facing issues in the future.

  1. Eliminate WiFi Interference

Another thing that can be done from your end to troubleshoot the not working issue is to get rid of WiFi interference. You might be wondering how to do that. Well, keeping certain things away from your extender can help you out.

Here are the devices, appliances, and surfaces you need to keep away your extender:

  • Cordless phones
  • Microwave ovens
  • Refrigerators
  • Washing machines
  • Treadmills
  • Televisions
  • Baby monitors
  • Mirrors
  • Fish tanks

Additionally, do not make the mistake of keeping your extender near thick concrete walls.

  1. Reconfigure the Netgear Extender

If none of the hacks mentioned above have helped you out, then it means that your device has not been set up properly. So, what to do in this case? Well, it’s simple. You need to reconfigure your Netgear wireless range extender.

That can be done if you refer to the instructions in the user manual. There you will find that the WPS method, Manual method, and setup via the Nighthawk app have been explained.

What is that? Do we sense doubt? If you own an N300 extender, then you will find the steps to perform www mywifiext net n300 setup in the user manual as well. The same goes for any other model that you own.


With that, our article written on how to troubleshoot the not working issue has ended. We have high hopes that this article will be able to help you out.

Out of the ones mentioned above, which hack assisted you the most? Was it the first one or the last one? Whichever it is, do share it with your fellow readers. If you are wondering how you can do that, know that you can make use of the comment section.

Leave a Reply

Your email address will not be published. Required fields are marked *