One of the common issues faced by Netgear extender users is a blinking red light on the device. Is your Netgear extender also showing red light? Voila! You are on the right page. This piece of write-up is going to give you in detail information about the red LED on your Netgear EX3700. It is a common yet major issue experienced in Netgear extenders. So, rest assured that you are not the only one struck in such a situation where you have no idea what is wrong with your Netgear EX3700.
There can be numerous reasons owing to the Netgear EX3700 showing red light. However, an incorrectly setup extender is the most frequent reason leading to this issue. By saying so, we mean, if you have not performed the Netgear EX3700 setup process rightly, then this might be the reason behind why your extender is blinking a red LED. Keep reading further to know how you can resolve the issue in the least possible time.
Why is Netgear EX3700 Showing Red Light?
Let us now know some possible reasons for Netgear extenders showing a red light. Listed below are a few frequent occurring reasons for this issue. Go through them one by one and try to identify the possible reason for the red light on your Netgear EX3700.
1. Poorly performed Netgear E3700 Setup:
Make sure that you have performed all the right steps of Netgear extender setup. Having an incorrectly setup extender will not let you access the internet. Use any of the two methods to perform the setup. Either follow the Netgear extender setup manual method or Netgear extender setup via Nighthawk App method.
2. Outdated Firmware:
If you have not updated your NetgearEX3700 lately, then there are chances that the older version of firmware may lead to the red light issue. Check the firmware version on your extender to confirm that you are not using a redundant firmware version, which is why you are experiencing red light issue on the Netgear extender.
3. Incorrect placement:
If you have not placed your Netgear extender at the right place, then consider shifting it to a new location. An ideal location for a WiFi range extender is somewhere in between the access point and the WiFi dead zones on your home. Also, place the range extender at a higher location to have better access to the signal.
4. Network Issue:
If you have any network-related issues, then this might be causing trouble with your Netgear WiFi range extender. Check with your ISP for internet-related problems.
5. Signal Interference:
Ensure that there are no other devices like Microwave ovens, other wireless devices, baby monitors, heavy mirrors, reflexive surfaces, etc. near the Netgear extender. These devices may cause signal interference thereby leading to the red light issue.
Now that you are fully aware of the reason behind Netgear EX3700 showing red light, let us have a glance at troubleshooting hacks to get the red LED blinking issue resolved.
Troubleshooting EX3700 Red Light
Apart from taking care of above-mentioned tips, follow the troubleshooting hacks mentioned next to resolve the issue.
Reboot Netgear EX3700
Turn off the Netgear extender by disconnecting it from the wall socket. Wait for some time and plug it back and power it on. This will complete the rebooting process. Check if the red light issue has been resolved or not. If you are shaking your head in a no, then move to the next troubleshooting step.
Perform Firmware Update
Consider updating the firmware if you haven’t done it for quite some time. To update firmware simply log in to your Netgear EX3700 and complete the firmware update in the settings. After the firmware update your issue should have been resolved. Otherwise, go to the next hack.
Reset the Netgear Extender
This would be the last resort if the red light issue still persists on your Netgear extender. To reset the extender, locate the Reset button and press it for some time. This will restore the factory default settings on Netgear EX3700. After performing the extender reset, repeat the setup process and we are sure that you will be able to get a green light on the Netgear extender.
By simply following the above-mentioned tips and tricks, you can rectify your Netgear EX3700 red light issue. After getting the green light on the extender, try accessing netgear_ext SSID of the Netgear extender to successfully start using its network.