Do you want the smooth and proper functioning of your Rockspace WiFi range extender? If yes, then you must update its firmware via http //re.rockspace.local. However, a number of Rock space WiFi extender users face issues while initiating the process. And, one of the most annoying issues that they experience is that their “Rock space WiFi extender firmware update failed”.
If you are also struggling with the same issue, then you are lucky that Google has redirected you to the right post. Over here, we are going to provide you with the best fixes that will surely help you get rid of “Rock space WiFi extender firmware update failed” issue at hand, Thus, without much delay, continue reading this post.
Fixed: Rockspace Firmware Update Failed
Fix 1: Reboot Rock Space WiFi Extender
Before you give any advance troubleshooting tips try to fix “Rock space WiFi extender firmware update failed” issue, we want you to start with the basic troubleshooting tip first.
Yes, restarting/ rebooting the Rock space WiFi extender. This is one of the most effective fixes to troubleshoot big technical issues with Rock space WiFi range extender.
Thus, to give your Rock space extender a fresh start, follow the guidelines highlighted below:
Step 1: First things first, disconnect your Rock space WiFi extender with your main router and other connected devices.
Step 2: Turn off your WiFi range extender.
Step 3: Wait for some time and let your Rockspace device take some rest.
Step 4: Then, turn on your extender and try to update the latest firmware version on it using http //re.rockspace.local.
We hope that after applying this fix, you are now able to troubleshoot “Rock space WiFi extender firmware update failed” issue. If not, then ease those worry lines from your forehead and apply the next tip highlighted below.
Fix 2: Check the Internet Connection
Chances are that you are not getting enough internet speed and only because of that is the “Rock space WiFi extender firmware update failed” issue is continuously disturbing you.
To troubleshoot the issue, contact your internet service provider and confirm that everything is fine from his end. Make sure all your internet bills are cleared and you are getting desired WiFi speed from this end.
Once you are getting uninterrupted internet speed from your ISP end, you will surely be able to fix “Rock space WiFi extender firmware update failed” issue.
Fix 3: Kick-off WiFi Interference
Have you placed your Rock space WiFi extender anywhere in your house? If yes, then you have one of the major reasons behind getting “Rock space WiFi extender firmware update failed” issue.
Bear in mind, your Rockspace WiFi extender is not meant for placing anywhere. You have to choose the best location for it. The ideal location for your Rock space WiFi extender is near your main router and that too on a higher, clean, and open area.
Note: While placing your Rockspace device and router in close proximity, you also have to make sure that your existing device i.e. the router is not hidden or placed on a congested surface.
Fix 4: Download the Correct Firmware Version
There is a possibility that you have downloaded an incorrect firmware version on your Rock space WiFi extender. Please verify it. If so, then you won’t be able to get Rock space WiFi extender firmware update success. So, ensure to download the correct firmware version as per the Rock space WiFi extender model you have.
Fix 5: Reset Rock Space Extender
Oh, snap! None of the above-mentioned troubleshooting tips helped you fix the “Rock space WiFi extender firmware update failed” issue. No worries! The post hasn’t ended yet. With this last, we assure you that “Rock space WiFi extender firmware update failed” issue will go away.
To reset your Rock space WiFi range extender, follow the instructions highlighted below:
Step 1: Do not unplug your Rock space WiFi extender but do disconnect it from your main router.
Step 2: Then, press the reset hole on your Rock space WiFi extender and hold it up for some time.
Step 3: Now, release the extender’s factory reset hole.
So, are you done with resetting Rockspace WiFi range extender? If yes, without delay, configure the device again. Navigate to the setup page of your device using its default IP and know how to setup Rockspace WiFi extender. On the Rock space WiFi extender setup page, you will get complete instructions to configure it without any hassle.
Now that your Rockspace WiFi extender is configured, you can access its firmware update page using http //re.rockspace.local and download the latest version as per the model you own.
Hopefully, “Rock space WiFi extender firmware update failed” issue is resolved now. If yes, we are ending up this post. I was glad to help you. Goodbye and take care!