A Guide to Fix Linksys Extender Firmware Update Failed Issue

For smooth functioning and upgraded performance of your Linksys WiFi range extender, you must update its firmware via http://extender.linksys.com. However, most of Linksys extender users face issues while trying to update Linksys extender’s firmware. If you are also among them, then worry not. We will surely help you out. In this particular post, we have come up with various Linksys extender troubleshooting tips that is going to help you get rid of firmware update failed issue on the fly. So, without waiting much, grab the fixes outlined underneath to troubleshoot the issue.

Fixed: Linksys Extender Firmware Update Failed

Fix 1: Start fixing “Linksys extender firmware update failed” issue by rebooting your device. The reason is, sometimes, technical glitches may prevent you from updating the latest firmware version on your device. But, rebooting/ power cycling can help you in a bigger way.

So, without thinking much, follow the instructions highlighted below and learn how to reboot or power cycle your Linksys WiFi range extender:

  • First things first, turn off your Linksys extender and disconnect it from your existing router.
  • Then, wait for some time, and after that, plug your device (Linksys extender) back in.
  • Thereafter, reconnect your Linksys WiFi extender and router and try to update the firmware again via http://extender.linksys.com.

Apart from this, make sure that your existing router is extender-capable. Know that, not every router makes a perfect pair with Linksys extender. By any chance, if you find any incompatibility between them, we suggest you replace your existing router with Linksys.

Just do Linksys router setup first using http //linksyssmartwifi.com login details, and then connect it with your Linksys extender.

And, once your devices are connected to each other, the “Linksys extender firmware update” failed issue will surely go away.

Fix 2: Another major reason that is not allowing you update Linksys extender’s firmware is your slow internet connection. To troubleshoot the issue, make sure everything is fine from your ISP end. Just in case, you find anything wrong from the end of your service provider, wait for some time till he fixes the issue for you.

Fix 3: There are chances that you haven’t downloaded the correct firmware version on your Linksys WiFi range extender. Verify it first! On the off chance if a wrong firmware version is downloaded by you, don’t sweat over it. Just reset your Linksys extender by pressing and holding its reset hole for some time, and releasing it.

After the resetting process, you have to perform Linksys range extender setup process from the scratch. And, once you are done with it, visit the Linksys extender’s firmware update page using extender.linksys.com for complete and correct instructions.

In the event that you see your Linksys extender has suddenly got restarted, then don’t worry. It is normal process. Rebooting of the Linksys extender right after the firmware update process indicates that Linksys extender firmware update process is completed successfully.

Fix 4: If the WiFi signals of your Linksys range extender are getting interrupted, then also it will lead you experience “Linksys extender firmware update failed” issue. For fixing it, just relocate your device. Choose the best location for the extender in your home where it gets difficulty in catching neighboring WiFi signals.

Also, do not exceed the distance between your Linksys extender and your router. Let us tell you that, your router and its WiFi signals play a very important role to complete the firmware update process of Linksys extender without any hassle.

To Sum Up

Our Linksys extender troubleshooting guide on how to fix “Linksys extender firmware update failed” issue ends here. We hope that after applying the tested and proven hacks mentioned above, you will be able to troubleshoot the issue at hand without any ado.

For more: linksys orange light

Leave a Reply

Your email address will not be published. Required fields are marked *