People out there prefer performing Netgear router setups in their homes so that they can access a super-fast internet connection. But, what is the point of that when you have to face the Nighthawk router keeps disconnecting issue? Various users have been experiencing this issue with their routers nowadays. Considering you are standing in the lot, follow the troubleshooting hacks mentioned in this post.
[Fixed] Netgear Router Keeps Disconnecting Issue
- Relocate the Netgear Router
Before you spin your head because of any other hack, consider looking at the location where your Netgear Nighthawk router is placed. Do you find that it is surrounded by cordless phones, mirrors, fish tanks, washing machines, refrigerators, microwave ovens, treadmills, and televisions? Well then, you need to change the location of your Netgear router right away. The reason is, such things can interfere with the signals of your wireless device thereby pushing its performance down the hill.
- Check the Power Socket
Have you given thought to the importance of power supply? If you have not, then you should do it now. An improper power supply is another major reason why you are not able to take full advantage of your Netgear Nighthawk router.
Your device might be receiving an improper power supply because of two reasons:
- The wall socket is damaged.
- Your router is not properly connected to the socket.
Whatever the case might be, to troubleshoot the issue, consider plugging your Netgear Nighthawk router into some other wall socket. Just make sure that the socket is located near the existing modem.
- Replace the Ethernet Cable
Perhaps you did not check the condition of the Ethernet cable before using it to connect your devices. Why don’t you check its condition now? It’s not too late. In case you find out that a lot of damage has been done to the cable, you need to get it replaced right away.
Once that is done, try to access the Nighthawk router login page. Are you able to do it with ease or does your wireless router still keeps disconnecting? Yes? You should probably take your attention to the next troubleshooting hack.
- Bring the WiFi Devices Closer
If a lot of distance is separating your Netgear router and the existing modem, then also it can become a cause behind the Netgear router keeps disconnecting issue. To take care of this problem, you need to reduce the distance between the networking devices.
Before you can even bat an eye, you will be able to troubleshoot the Netgear router that keeps disconnecting issue. In case you still do not get any luck, do not forget that we still have a couple of more steps to help you out.
- Reboot the Netgear Router
Considering all the aforementioned troubleshooting hacks have failed to work for you, you should reboot your Netgear Nighthawk router. Now you might be thinking about how to reboot your device, isn’t? Well then, why worry when you can follow the below-given instructions? Thus, follow them and learn how rebooting your device is possible:
- Switch off your router and then unplug it.
- Wait for some time.
- Plug the router and then turn it on.
For your information, you can also reboot your router by accessing its web user interface.
- Perform Netgear Firmware Update
When was the last time when you considered it important to update the firmware of your Netgear wireless router? Do you not remember? Well, that is because you did it very long ago. Therefore, you need to update the firmware of your device right away.
Updating the firmware of your Netgear Nighthawk router is possible if you access the Netgear Nighthawk login page. Thereafter, you need to access the Settings menu, hit the Firmware Update button, and follow the on-screen prompts.
- Reset the Nighthawk Router
Did nothing work for you? Still, need our help in troubleshooting the Netgear router that keeps disconnecting issue? It is recommended that you set up your device again. But, before that, doing one simple thing is required, i.e. resetting your device.
By resetting your device, do you know what will happen? Every change that you have made to your Netgear Nighthawk router will get erased. Are you ready to take that sort of risk? Is that a yes that we see? Okay then.
Here is how you can reset your wireless device:
- Locate the Reset button.
- You will find it at one of the corners of the device.
- Press it.
- Hold on.
Now, refer to the instructions mentioned in the user manual and then set up your router. You have the option of doing so using the WPS method, Manual method, or Nighthawk app.
The Netgear router keeps disconnecting issue has ruined the internet experience of not one but more than ninety percent of users. We really hope that you will be able to resolve this issue after you have taken a walk through the hacks given above. Share your feedback regarding this article in the comment section.